Thunderbolt designs, builds and capacity-tests 24 V lithium batteries for buses, coaches and trucks in our Dubai workshop: LiFePO₄ house and hotel-load packs that keep the air conditioning, fridges and electronics running with the engine off, packs that support the starter batteries, and custom packs for electric bus conversions and prototypes. We size each one to the vehicle and its duty cycle and deliver across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman.
What our bus battery service includes
Most buses, coaches and heavy trucks run on 24 V. The starter batteries are built to crank the engine, not to power a vehicle that stands for an hour with its systems on — and in the Gulf a parked bus with passengers or a resting driver needs cooling. That is why so many engines idle. We build the lithium battery that lets them stop. You get:
- Engineering. An audit of the loads and the duty cycle — layovers, overnight stops, AC, electronics — the pack voltage and capacity, the BMS, the charging plan and a costed proposal.
- The battery. New grade-A LiFePO₄ cells, matched before assembly, in compression holders, with a smart BMS rated for the vehicle's current and active balancing.
- Charging from the vehicle and the depot. A DC-DC charger from the 24 V alternator, a mains charger for the depot, and the isolation between the starter circuit and the house pack.
- A frame for the bay. A steel mounting frame made to the luggage bay, the battery box or the chassis rail, with breakers, fuses and cable routing.
- A capacity test and its log. Every pack is charged, balanced and discharged at its working current before it leaves; you receive the measured capacity.
- Delivery, data and warranty. Delivery across the UAE and GCC under our delivery policy, BMS data over Bluetooth, CAN or RS485, and a warranty of up to 36 months on components and workmanship, stated in the order.
Who it is for
| Customer | What they need | Typical pack |
|---|---|---|
| Bus and coach operators | Cooling and electronics during layovers with the engine off; fewer flat starter batteries | 24 V, 100–300 Ah |
| School and staff transport fleets | A cool cabin while waiting, without idling outside a school or a site | 24 V, 100–300 Ah |
| Truck and trailer fleets | A cab cooler, fridge and devices through a driver's rest stop | 24 V, 100–200 Ah |
| Motorhome and mobile-unit builders on a bus chassis | A complete off-grid system fitted in the cargo bay | 24 V, 10–22 kWh |
| Electric bus and truck developers | Prototype traction or auxiliary packs, fast, in small numbers | To the drawing: 24 V up to high voltage |
| Special vehicles | Clinics, broadcast vans, command and catering vehicles that must run their equipment silently | 24 V or 48 V, 5–30 kWh |
Why a 24 V lithium battery for a bus or truck
- Stop idling to run the AC. An engine idling for cooling burns fuel, wears the engine and adds fumes where people wait. A lithium auxiliary pack runs electric cooling and electronics with the engine off.
- Protect the starter batteries. Lights, CCTV, ticketing, telematics and fridges drain lead-acid starter batteries during stops; a separate house pack takes those loads, so the house loads cannot flatten the starter batteries.
- Deep cycles every day. You can use 80–90% of a LiFePO₄ battery daily for thousands of cycles; lead-acid lasts only if you use about half.
- Less weight, more payload. A lithium pack weighs a fraction of a lead-acid bank of the same usable energy.
- A path to electric. The same engineering — cells, BMS, thermal design, CAN — scales to traction packs for conversions and prototypes.
How it works: from brief to a battery in the bay
- Brief. You send the vehicle model, the loads you want to run with the engine off, how long the stops are, and photos of the space — by WhatsApp or the quote form.
- Engineering and proposal. The pack, the charging plan, the frame, the warranty, the price and the date.
- Assembly. Cell matching, assembly, BMS programming and the frame in our Dubai workshop.
- Capacity test. Each pack is charged, balanced and discharged at its working current; you receive the measured capacity.
- Delivery or pickup. Builds start from two working days; fleet orders and complete systems take longer and the date is in the quote.
- Support. Questions answered from the BMS data; service and capacity tests in the workshop when needed.
Why Thunderbolt
- We have built 24 V systems into a bus. A 21.6 kWh, 24 V off-grid system with a 5 kW inverter, fitted on a frame made to the niche of a bus cargo bay.
- Custom, not catalogue. The voltage, the capacity, the shape and the connectors are set by the vehicle.
- From a single prototype to a series. One pack for a test vehicle, then the same build repeated for the fleet.
- Proof before delivery. A measured capacity for every pack; more than 1,200 packs shipped; we are certified to supply batteries to the aviation industry.
24 V lithium battery packs we build for buses and trucks
| Pack | Voltage | Capacity | Typical use |
|---|---|---|---|
| Auxiliary / house pack | 24 V (25.6 V nominal) | 100–300 Ah (2.6–7.7 kWh at 25.6 V; 2.4–7.2 kWh on a 24 V label) | Lights, CCTV, ticketing, telematics, fridge, fans |
| Anti-idling / hotel-load pack | 24 V | 200–600 Ah | Electric parking cooler or cab AC during stops |
| Starter support | 24 V | sized to the starter | Backing up or replacing the lead-acid starter pair, by engine data |
| Off-grid system on a bus chassis | 24 V | 10–22 kWh+ | Motorhomes, mobile clinics, broadcast and command vehicles |
| Electric bus / truck prototype pack | 48 V to high voltage | to the drawing | Conversions, test vehicles, auxiliary HV systems |
Eight LiFePO₄ cells in series make a 24 V battery: 8 × 3.2 V = 25.6 V nominal, which sits comfortably inside a vehicle's 24 V system.
24 V battery: lithium vs lead-acid for buses and trucks
| Chemistry | Usable depth of discharge | Typical cycle life | Heat tolerance | Where it fits |
|---|---|---|---|---|
| Lead-acid (flooded, AGM) | about 50% | hundreds to about 1,000 | poor — life falls fast in heat | engine cranking, cheap and familiar |
| LiFePO₄ | 80–90% | 3,000–6,000+ | good — more stable than NMC | auxiliary, hotel-load and house packs |
| Li-ion NMC | 80–90% | 1,000–2,000 | moderate | traction packs where weight decides |
| LTO | 90%+ | 10,000+ | very good | very high cranking or fast-charge duty |
For the auxiliary side we build on LiFePO₄. For cranking, many fleets keep the lead-acid starter pair and add a lithium house pack, which is the simplest and most robust layout; where a lithium cranking pack makes sense, we size it from the engine's starter current. Cycle life depends on temperature, depth of discharge and charge rate; these are typical datasheet ranges, and the cells and warranty for your build are stated in the quote.
Anti-idling: running bus air conditioning with the engine off
Idling is a growing concern in the UAE. Ajman's "Turn off the Engine" scheme asks drivers to switch off at timed traffic lights to cut emissions and noise, and Abu Dhabi Police warn that drivers can face a Dh500 fine for leaving a vehicle running unattended. For a bus or truck the reason to idle is usually cooling. What a battery can and cannot do:
- Cab and driver cooling. A 24 V electric parking cooler for a truck cab or a coach driver's area runs for hours from a 200–400 Ah pack — the easiest win.
- Electronics and comfort loads. Fans, lights, CCTV, ticketing, fridges and charging points with the engine off.
- Full cabin AC. A full-size coach's roof AC is driven by the engine and needs well over ten kilowatts; running it from a battery means an electric AC and a large pack, which is a conversion or a prototype project rather than an add-on. We engineer those too.
Battery charger 12 V / 24 V: charging a lithium pack on a bus
People search for a "battery charger 12V 24V" because vehicles mix both. A lithium pack needs a charger with a LiFePO₄ profile — for a 24 V pack, typically up to 28.8 V (3.6 V per cell × 8) — not the lead-acid settings of a workshop charger. On the vehicle we use three paths:
- DC-DC charger from the alternator. It limits the current so a lithium pack, which accepts a lot, does not overload the alternator, and it keeps the starter circuit separate.
- Mains charger at the depot. Overnight or between shifts, sized so the pack is full by the next run.
- Converters for 12 V loads. A 24-to-12 V converter feeds 12 V devices instead of tapping one battery of the starter pair, which unbalances it.
How to size a 24 V auxiliary battery: a worked example
A staff bus waits two hours at a site, twice a day. With the engine off, the driver's 24 V parking cooler draws about 1 kW, and lights, CCTV and the radio draw about 0.2 kW:
÷ 0.9 usable depth of discharge ≈ 2.7 kWh installed
2.7 kWh ÷ 25.6 V ≈ 104 Ah → a 24 V 105 Ah pack per stop, or 210 Ah if it cannot recharge between stops
Then check the charging: the alternator must refill the pack on the drive between stops, so the DC-DC charger current and the driving time decide whether 105 Ah is enough or the pack must hold both stops. We do this with your real route and equipment before quoting.
Electric buses in the UAE: what conversions and prototypes need
Electric buses have arrived in the UAE. Dubai's RTA received 40 Zhongtong electric buses with 434 kWh batteries in January 2026, after piloting a Volvo electric bus with a 470 kWh battery and an air-conditioning system for extreme heat. In June 2026 RAKTA put Ras Al Khaimah's first electric bus on the relaunched Purple Route. Worldwide, the IEA counts more than 70,000 electric bus sales in 2024.
Factory buses come with factory packs. Where we help is the work around them: auxiliary and low-voltage packs for electric vehicles, packs for conversions and test vehicles, prototype modules for developers who need a few packs quickly, and repair or re-celling of packs (see battery pack repair and replacement). For traction work we start from the drive and the duty cycle, and agree the BMS, CAN messages, thermal management and safety concept with the vehicle's engineers.
24 V batteries for Gulf heat and dust
- Placement. A luggage bay or battery box away from the exhaust and the engine, shaded and ventilated where possible.
- BMS temperature limits. External sensors along the cells; charging is reduced or stopped when the pack is too hot.
- Vibration and dust. Compression holders, a welded frame, sealed cases and vibration-proof, torque-marked connections.
- Cooling for large packs. For traction and high-power packs, thermal management designed into the pack from the start.
Inside a 24 V bus battery
- Cells. Grade-A prismatic LiFePO₄ cells, eight in series per 24 V string, checked and matched before assembly, in compression holders.
- BMS. Protection against over- and under-voltage, over-current, short circuit and temperature; Bluetooth for service and CAN or RS485 for the vehicle's systems or telematics.
- Active balancing. Keeps the cells equal through daily deep cycles.
- Busbars, cables and protection. Copper busbars, cables sized for the peak current, a fuse or breaker close to the pack and a main isolator.
- Display. A state-of-charge display on the dashboard if the driver needs one.
Bus battery price in the UAE: what drives the cost
- Capacity in kWh. Set by the loads and the length of the stops.
- Current and BMS. Starter support and high-power loads need a BMS and busbars rated for hundreds of amps.
- Charging hardware. DC-DC chargers, depot chargers and converters.
- Integration. Frames, CAN integration and documentation for a fleet or a prototype.
- Lifetime cost. Fuel and engine hours saved by not idling, and starter batteries that last longer, usually matter more than the purchase price.
Send us the brief and we return a costed proposal — request a quote.
Bus and truck batteries across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman
We build in Dubai and deliver to all seven Emirates and to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman under our delivery policy; lithium batteries travel as Class 9 dangerous goods, and the method, the date and who pays import duties are in the quote. For a fleet, we build and test the first pack, you run it, and the rest follow to the same specification.
Safety and standards
For transport, the cells we use have passed the tests of UN Manual of Tests and Criteria sub-section 38.3. The finished pack is shipped as Class 9 dangerous goods under the rules that apply to its size and production run. For auxiliary and stationary-type packs, the safety requirements of IEC 62619 for industrial lithium batteries are our design reference; the same IEC page points to the IEC 62660 series for road-vehicle traction cells; the traction pack itself is governed by each country's vehicle type-approval rules (UN Regulation No. 100 where it applies). On the vehicle: a fuse near the pack, cables sized for the peak, a secure mounting that survives braking, and separation from the starter circuit. If a fleet, an authority or an insurer needs specific documents, tell us at the brief stage.
Related applications
The same 24 V packs run our caravan and motorhome power systems and our UPS and inverter batteries. For electric cars see EV and hybrid battery packs; for warehouses, forklift and AGV lithium batteries; for 12 V systems, 12 V LiFePO₄ batteries. Our 20 kW UPS project shows how we build and commission larger systems.
From our work
- 24 V off-grid system in a bus cargo bay. A motorhome built on a bus: three LiFePO₄ batteries of 24 V 300 Ah (900 Ah, 21.6 kWh) on a frame made to the cargo-bay niche, a 5 kW sine-wave inverter, three 50 A mains chargers, an auxiliary charger running from the vehicle's alternator and a 12 V converter. 24 V DC up to 2.5 kW, 12 V DC up to 600 W, 220 V AC up to 5 kW; a full charge from empty in about 6 hours. Read the full project.
- 24 V 7.2 kWh LiFePO₄ battery. Our largest single 24 V battery to date, paired with a 3 kW hybrid inverter: up to about 12 hours at 0.6 kW, 4.8 hours at 1.5 kW and 2.4 hours at 3 kW, calculated from the full 7.2 kWh.
- 24 V 210 Ah and 105 Ah LiFePO₄ batteries with smart BMS. Including a 24 V 105 Ah unit with 24 V DC and 220 V AC outputs up to 2,000 W in a sealed serviceable case, charged from empty in about 2 hours.
What to send us for a quote
- The vehicle: make, model, year, and whether it is diesel, hybrid or electric.
- The loads you want to run with the engine off — the cooler or AC model first — and how long the stops are.
- How the pack can be charged: alternator, depot mains, solar.
- Photos and dimensions of the space, the number of vehicles, and the country and city for delivery.
Send it by WhatsApp or through the quote form — we reply on WhatsApp during working hours with questions or a costed proposal.
Frequently asked questions
What battery does a bus use?
Most diesel buses, coaches and trucks have a 24 V electrical system with two 12 V lead-acid starter batteries in series. Electric buses carry a large high-voltage traction battery — Dubai's new Zhongtong electric buses have 434 kWh — plus a 24 V low-voltage system for lights and controls.
Do you build electric bus batteries?
We build 24 V LiFePO₄ auxiliary and hotel-load packs for buses and coaches, and custom traction packs up to 96 V for electric bus conversions, shuttles and prototypes. The high-voltage packs of factory-built electric buses come from the bus maker.
Can a lithium battery run a bus air conditioner with the engine off?
It can run a 24 V electric parking cooler or cab AC and all the electronics for hours. A full-size coach's engine-driven roof AC needs well over ten kilowatts; running it from a battery requires an electric AC and a large pack, which is a conversion project we can engineer.
Can I replace my truck's 24 V lead-acid batteries with lithium?
For auxiliary loads, yes — a 24 V LiFePO₄ house pack is the simplest upgrade. For cranking, many fleets keep the lead-acid starter pair and add the lithium pack; a lithium cranking battery is possible but must be sized from the engine's starter current.
What charger do I need for a 24 V lithium battery?
One with a LiFePO₄ profile, typically charging to 28.8 V for an eight-cell 24 V pack. On the vehicle we use a DC-DC charger from the alternator; at the depot, a mains charger. A 12 V/24 V lead-acid charger is not suitable unless it has a lithium mode.
How big a 24 V battery do I need for a bus?
Multiply the power of the loads you want to run with the engine off by the stop time, then divide by 0.9. A 1 kW cooler plus 0.2 kW of electronics for two hours needs about 2.7 kWh, a 24 V 105 Ah pack.
Do you build batteries for electric buses?
We build auxiliary and low-voltage packs for electric vehicles, packs for conversions and test vehicles, and prototype modules for developers; factory electric buses such as RAKTA's and the RTA's come with their makers' traction packs. We also repair and re-cell packs.
How much does a 24 V bus battery cost in the UAE?
It depends on the capacity in kWh, the current the BMS must handle, the charging hardware and the integration work. The fuel and engine hours saved by not idling usually matter more than the purchase price. Send us your vehicle and loads and Thunderbolt returns a costed proposal.
How long does it take to build a 24 V bus battery?
Single packs are built and tested from two working days; fleet orders and prototype traction packs take longer, and the date is stated in the quote.
Sources
- RAKTA — Purple Route relaunch with the emirate's first electric bus (3 June 2026) — Ras Al Khaimah's first electric bus on a public transport route
- Dubai Media Office — RTA receives electric buses (18 January 2026) — 40 Zhongtong electric buses, 434 kWh batteries, up to 280 km range
- Gulf News — RTA unveils high-tech electric bus in pilot run (16 April 2025) — Volvo electric bus with a 470 kWh battery and AC for extreme temperatures
- IEA — Global EV Outlook 2025: trends in heavy-duty electric vehicles — global electric bus sales topped 70,000 in 2024
- The National — Drivers in Ajman urged to turn engines off at red lights (19 February 2024) — Ajman's Turn off the Engine scheme to cut emissions and noise
- Khaleej Times — Abu Dhabi Police warn against leaving vehicles running unattended — Dh500 fine for leaving a vehicle running unattended
- IEC 62619 — safety requirements for industrial lithium batteries; road-vehicle traction cells fall under the IEC 62660 series
- IATA Lithium Battery Guidance Document (2026) — lithium cells and batteries must pass UN Manual of Tests and Criteria sub-section 38.3 before transport
Image credits: Cover: WeRide Robotaxi GXR in Dubai by Kk0521, CC BY-SA 4.0, via Wikimedia Commons (cropped).


