Thunderbolt builds lithium (LiFePO₄) traction batteries for electric forklifts, reach trucks, pallet trucks, stackers and AGVs in our Dubai workshop. Each pack replaces a lead-acid battery in the truck you already own, is sized to its compartment, counterweight and shift pattern, is capacity-tested before it leaves, and is delivered to warehouses across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman.
What our forklift battery service includes
We do not sell or rent forklifts. We build the battery that decides whether a truck finishes the shift, how long it stands on charge and how many years it keeps working. You get:
- A survey of the truck and the shift. The truck voltage, the compartment size, the minimum battery weight on the data plate, the controller and its communication, and how many hours and shifts it works.
- The traction pack. New grade-A LiFePO₄ cells, matched before assembly, in compression holders, with a smart BMS, active balancing, temperature sensors and a steel case built to the compartment.
- Weight and stability. A lithium pack is lighter than lead-acid; where the truck needs the battery as counterweight, ballast is built into the case so the truck keeps its rated capacity.
- Charging. A lithium charger sized for opportunity charging during breaks, or the BMS configured for a charger you already have that supports lithium.
- Communication. For trucks and AGVs that need it, the BMS reports state of charge and limits to the vehicle controller over CAN or RS485.
- A capacity test and its log. Every pack is charged, balanced and discharged in our workshop before delivery; you receive the measured capacity.
- Warranty and service. Up to 36 months on components and workmanship, stated in the order.
Who it is for
| Customer | What they need | Typical pack |
|---|---|---|
| Warehouses and 3PL operators | Trucks that run two or three shifts without battery changes or a battery room | 48–80 V, 300–600 Ah |
| Forklift rental companies | Rental trucks that come back healthy, with batteries that do not depend on the customer's watering | 24–80 V, built to the fleet model |
| Cold stores and food distribution | Trucks that work in chilled rooms and come out to charge | 24–48 V, with low-temperature charge limits |
| Factories and workshops | A replacement for an ageing lead-acid battery in one or two trucks | 24–80 V, built to the compartment |
| Robotics and AGV integrators | A compact pack that talks to the vehicle controller and charges automatically at a dock | 24–48 V, 50–200 Ah, CAN/RS485 |
Why replace a lead-acid forklift battery with lithium
- Opportunity charging. A lithium pack can be topped up in a coffee or lunch break; a major forklift maker notes that short interim charges are allowed and even preferred on lithium and that battery changes are no longer necessary. A lead-acid battery wants a full charge and a rest, so multi-shift sites keep a spare battery for every truck.
- No battery room. Lead-acid charging gasses, and workplace rules such as OSHA 1910.178 require ventilation for the fumes, equipment for flushing and neutralising spilled electrolyte, and no smoking in the charging area. LiFePO₄ does not gas in normal charging, so chargers can stand where the trucks park.
- No watering, no acid. No distilled water, no spills on the warehouse floor, no corroded trays.
- Full power to the end of the shift. LiFePO₄ voltage stays flat, so lift and travel speed do not fall as the battery empties.
- Heat. Warehouses in the Gulf are hot, and lead-acid life falls quickly with temperature — Battery University's rule is that each 8 °C rise halves the life of a sealed lead-acid battery.
- Life. The LiFePO₄ cells we use most are rated by their maker for at least 3,500 cycles at 25 °C to 80% capacity.
How it works: from brief to a truck back in the aisle
- Brief. Send the truck make, model and year, a photo of the data plate and of the battery compartment with a tape measure, the existing battery's label and how the truck works (hours, shifts, breaks) — by WhatsApp or the quote form.
- Engineering and costed proposal. Voltage, capacity, cells and their datasheet, BMS limits, ballast, the charger, the warranty, the price and the date.
- Assembly. Cell matching, compression frame, BMS programming and the case, in our Dubai workshop.
- Capacity test. Each pack is charged, balanced and discharged; you receive the measured capacity.
- Delivery or pickup. Small packs for pallet trucks and AGVs start from two working days; large forklift batteries take longer, and the date is in the quote. Delivery under our delivery policy.
- Support. Questions are answered from the BMS data; capacity checks and service when needed.
Why Thunderbolt
- Built in Dubai, serviced in Dubai. A forklift battery is heavy and expensive to ship back; ours is made, tested and repaired here.
- Built to your truck. The compartment, the connector, the counterweight and the controller decide the pack; we build to them instead of selling one box for every truck.
- Heavy traction packs are our daily work. We build LiFePO₄ traction batteries up to 18 kWh and 340 A of continuous discharge, with active balancing and smart BMS.
- Proof before delivery. A measured capacity for every pack.
Forklift and AGV battery packs we build
Electric material-handling trucks run at a handful of standard voltages. The lithium pack keeps the truck's nominal voltage, so the motor and controller see what they were designed for. Typical builds:
| Truck | Voltage | Typical capacity | Notes |
|---|---|---|---|
| Pallet trucks and stackers | 24 V | 100–300 Ah | compact packs, often a drop-in for a lead-acid block |
| Reach trucks and order pickers | 24–48 V | 200–600 Ah | tall, narrow compartments; side-extraction cases |
| Counterbalance forklifts, 1.5–3.5 t | 48 V or 80 V | 300–700 Ah | ballast to the data-plate minimum weight |
| AGVs and AMRs | 24–48 V | 50–200 Ah | CAN/RS485 to the controller, dock charging contacts |
| Tow tractors and platform trucks | 48–80 V | 200–500 Ah | high continuous current |
These are the ranges we quote most often, not limits; our packs span 3.6 to 96 V.
Electric forklift battery weight and counterbalance
On a counterbalance forklift, the battery is part of the counterweight. The data plate gives a minimum battery weight, and the truck's rated lifting capacity assumes it. A lithium pack of the same energy weighs much less than lead-acid, so we never ship a bare lithium pack into a counterbalance truck: we build steel ballast into the case and bring the total to the data-plate minimum, with the centre of gravity where the old battery had it. The pack stays within the data plate's minimum and maximum battery weight; where the truck maker's approval is needed for a change of battery type, we supply the pack data for it. On pallet trucks, stackers and AGVs, where the battery is not a counterweight, the lower weight is a straight gain.
Opportunity charging: running two or three shifts on one battery
Lead-acid fleets usually charge a battery once a day, let it cool, and swap in a spare for the next shift. A LiFePO₄ pack is used differently: it is plugged in at every break, and its capacity only has to cover the work between breaks plus a margin. That is why a lithium battery for a two-shift truck is often smaller than the lead-acid battery it replaces, and why the spare battery, the battery-change trolley and the charging room disappear. The charger is sized for the breaks: a higher current fills more in a 30-minute lunch, within the cells' and BMS's charge limits.
LiFePO₄ vs lead-acid forklift batteries
| Flooded lead-acid traction | LiFePO₄ | |
|---|---|---|
| Usable capacity per cycle | about 80% at most, less for long life | 80–90% |
| Typical cycle life | about 1,500 | 3,000+ (cell rating ≥3,500 at 25 °C) |
| Charging | full charge, then cool-down; equalisation | top-up at any break |
| Maintenance | watering, cleaning, equalising | none beyond a yearly check |
| Charging area | ventilated, with acid spill equipment | chargers at the parking point |
| Weight | heavy, serves as counterweight | light; ballast added where needed |
These are typical ranges, not promises for a specific battery; cycle life depends on temperature, depth of discharge and charge rate. We do not use NMC lithium-ion in forklifts: the weight it saves does not matter in a truck that needs ballast, and LiFePO₄ is more stable and lasts longer.
Forklift batteries for Gulf warehouses: heat, dust and cold stores
- Heat. The cells we use are rated by their maker to charge between 0 and 55 °C; external sensors on the cells let the BMS reduce or stop charging before that, and stop discharge if the pack overheats. Chargers belong in the coolest part of the building, not by the loading-dock doors.
- Cold stores. The same datasheet gives a charge limit of 0 °C. Trucks that work in freezers come out to charge, or the pack gets heaters; the BMS blocks charging below the limit. The datasheet also limits discharge to −20 °C, so for deep-freeze rooms below that the pack is insulated and heated.
- Dust. A closed steel case with sealed connectors keeps dust out of the BMS and the busbars in yards and free-zone warehouses where sand blows in through open doors.
- Vibration. Cells sit in rigid compression frames and every bolted joint is torque-marked, because a truck crossing dock plates shakes the pack all day.
Inside a lithium forklift battery
- Cells. New grade-A prismatic LiFePO₄ cells from EVE and other established makers, checked for voltage and internal resistance, matched, and held in a compression frame.
- BMS. A smart BMS sized for the truck's peak current — our heavy packs use BMS boards rated up to 340 A continuous — with protection for every cell against over- and under-voltage, over-current, short circuit and temperature, and Bluetooth for diagnostics.
- Active balancing. A separate active balancer, typically 4–5 A, keeps a large series string equal over thousands of cycles.
- Case, ballast and connector. A steel case built to the compartment, ballast where the truck needs it, lifting eyes, and the same connector type as the truck's harness.
- Display and controls. A state-of-charge display for the driver, and physical buttons to wake the BMS and the balancer when the truck is serviced.
AGV battery packs: communication and automatic charging
An AGV or autonomous mobile robot has no driver to watch the gauge, so the battery has to tell the vehicle what it can do. We build AGV packs with a BMS that reports state of charge, voltage, current, temperature and alarms to the vehicle controller over CAN or RS485, with the commands set to the integrator's protocol, and with the charge limits the docking charger needs. The pack is shaped to the chassis, often low and flat, with external temperature sensors and service buttons.
How to size a lithium forklift battery: a worked example
A 48 V counterbalance forklift works two 8-hour shifts. Its 48 V 625 Ah lead-acid battery ends a shift at about 60% discharged, and the site has two 30-minute breaks per shift.
top-up in two 30-minute breaks at 100 A ≈ 51.2 V × 100 A × 1 h ≈ 5.1 kWh
pack must cover ≈ 18 − 5.1 ≈ 12.9 kWh, plus a 25% margin ≈ 16 kWh usable
LiFePO₄ 51.2 V × 400 Ah = 20.5 kWh; at 90% usable ≈ 18.4 kWh ✓
Then the checks: the BMS and cells must deliver the controller's peak current while lifting and travelling; the charger must reach 100 A and refill the pack in the gap between shifts — about 2.5 hours at 100 A for the 12.9 kWh used; if the shifts run back to back, the pack is sized for both shifts together; and the case with ballast must meet the minimum weight on the data plate. We do this arithmetic with your truck's real numbers on every quote.
Forklift battery price in the UAE: what drives the cost
People search “forklift price” and “forklift rental”; we do not sell or rent trucks, but for an electric forklift the battery is one of the largest parts of the running cost. What moves the price of a lithium pack:
- Capacity and voltage. Cost scales with kilowatt-hours; an 80 V truck needs more cells than a 24 V pallet truck.
- Current. A truck with a powerful controller needs a BMS and cells rated for more amps.
- Case and ballast. A steel case built to the compartment with ballast costs more than a pack in an open tray.
- The charger and communication. A fast opportunity charger and CAN integration add cost.
- Lifetime cost, not purchase price. Lithium costs more to buy but removes the spare battery, the battery room, watering and the replacement lead-acid sets — which is why rental fleets and multi-shift sites look at it first.
Send us the brief and we return a costed proposal — request a quote.
Forklift batteries across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman
We build in Dubai and deliver to all seven Emirates and to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman as Class 9 dangerous goods (see our delivery policy). Forklift fleets in the region work in its logistics and industrial zones: the free-zone warehouses of JAFZA in Jebel Ali and of Dubai South, the industrial areas of Sharjah and Ajman, the port zones of Abu Dhabi such as KIZAD, and the distribution centres of Riyadh, Jeddah, Dammam, Doha, Kuwait, Bahrain and Sohar. For a fleet we build one pack, test it in your truck, and then build the series.
Safety and standards
Three standards frame a lithium forklift battery. IEC 62619 sets the safety requirements for lithium cells and batteries in industrial use, and its scope names forklift trucks and AGVs; it is the reference we design to. IEC 62485-6 covers the safe operation of lithium-ion batteries in traction applications, including lift trucks and AGVs — the rules for the battery installation and its charging. In North America, UL 2580 covers batteries for ride-on forklifts. For transport, lithium cells must pass the tests in subsection 38.3 of the UN Manual of Tests and Criteria; the cells we use have passed them; the finished battery is shipped as Class 9 dangerous goods under the rules that apply to its size and production run. Every pack leaves after a full capacity test. If your site or tender needs specific certificates, tell us at the brief stage.
Related applications
The same traction-pack technology runs in our golf cart batteries, robot and drone battery packs, 24 V bus and truck batteries and 12 V LiFePO₄ batteries for industrial controls. For backup power in the warehouse itself, see UPS and inverter batteries and our 20 kW UPS project for a production site; for rooftop solar on the warehouse, solar battery storage. If an existing lithium pack has failed, see battery pack repair and replacement.
From our work
- 60 V 18 kWh LiFePO₄ battery and charging station for an electric forklift: grade-A EVE cells in a compression holder frame, a smart BMS rated 340 A, continuous discharge up to 18,000 W (300 A at 60 V), a managed 4,000 mA active balancing module, and a 2.9 kW charger that takes the pack from 0 to 100% in 7.5 hours.
- 48 V 105 Ah LiFePO₄ traction pack for a tracked robotic platform: grade-A cells in compression holders, active balancing, a smart BMS interface, external temperature sensors, a battery-to-controller module over RS485 and CAN with configurable commands, and physical buttons to start the BMS and the balancer.
- 48 V 105 Ah, 5,040 W LiFePO₄ packs for robotic platforms: 340 × 275 × 220 mm, about 37 kg, grade-A EVE cells, smart BMS with Bluetooth, active balancing, temperature sensors and additional control units.
- 72 V 150 Ah LiFePO₄ traction battery: 435 × 405 × 220 mm, 76 kg, 10,800 W, up to 150 A discharge and 75 A charge, active balancing and Bluetooth, with a 10 A charger.
What to send us for a quote
- The truck make, model and year, and a photo of its data plate (voltage, minimum battery weight, battery compartment size).
- A photo of the existing battery and its label, and of the compartment with a tape measure.
- How the truck works: hours per shift, shifts per day, breaks, and where it charges.
- For AGVs: the controller and its protocol (CAN or RS485), and the dock charger.
- How many trucks, and the country and city of the site.
Send it by WhatsApp or through the quote form — we reply on WhatsApp during working hours with questions or a costed proposal.
Frequently asked questions
Can I convert my electric forklift from lead-acid to lithium?
Yes, in most cases. We keep the truck's voltage and build the pack to its compartment and connector, add ballast up to the minimum battery weight on the data plate, and set the BMS to the controller's current.
Can a forklift rental fleet run on lithium batteries?
Yes. For forklift rental and electric forklift rental fleets, lithium removes watering and battery swaps, so the battery does not depend on the customer's watering or charging routine. We build the pack to the fleet's truck model and charger.
Do you build lithium batteries for a reach truck?
Yes. Reach truck batteries are usually 24–48 V in a tall, narrow compartment; we build the LiFePO₄ pack and its case to the compartment, with the ballast the truck's stability needs.
Why does a lithium forklift battery need ballast?
On a counterbalance forklift the battery is part of the counterweight, and the rated lifting capacity assumes the minimum battery weight on the data plate. A lithium pack is much lighter, so steel ballast is built into the case to restore that weight.
What is opportunity charging?
Plugging the truck in at every break instead of charging once a day. LiFePO₄ accepts short top-ups without harm, so a pack only has to cover the work between breaks, and a multi-shift truck no longer needs a spare battery.
Do lithium forklift batteries need a battery charging room?
Lead-acid charging gasses and needs ventilation and acid spill equipment. LiFePO₄ does not gas in normal charging and needs no watering, so chargers can stand where the trucks park; follow your site's fire and electrical rules for the charger location.
How long does a lithium forklift battery last?
The LiFePO₄ cells we use are rated for at least 3,500 cycles at 25 °C before capacity falls to 80%. Real life depends on heat, depth of discharge and charge rate, which is why we size the pack and set its temperature limits for your site.
What is the price of a forklift battery in the UAE?
It depends on the voltage and capacity, the controller current, the case and ballast, and the charger. Lithium costs more than lead-acid to buy but removes spare batteries, watering and the battery room. Send us the truck details and Thunderbolt returns a costed proposal.
Do you rent or sell forklifts?
No. We build and service lithium batteries for forklifts and AGVs. Forklift rental companies can fit our packs to their own fleets.
Can you build batteries for AGVs and warehouse robots?
Yes. We build 24–48 V AGV packs whose BMS talks to the vehicle controller over CAN or RS485, with the charge limits the docking charger needs, shaped to the chassis.
Do you deliver forklift batteries outside Dubai?
Yes, to all seven Emirates and to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman as Class 9 dangerous goods; the method and date are in the quote.
Sources
- IEC 62619:2022 — safety requirements for lithium cells and batteries in industrial applications; scope names forklift trucks and AGVs
- IEC 62485-6:2021 — safe operation of lithium-ion batteries in traction applications, including lift trucks and automatic guided vehicles
- UL — What is UL 2580 — battery safety standard covering ground mobility equipment including ride-on forklifts
- OSHA 29 CFR 1910.178 — Powered industrial trucks — paragraph (g): ventilation for gassing batteries, electrolyte flushing and neutralising, no smoking in the charging area
- Linde Material Handling — Li-ion technology — lithium forklift batteries: charging in short breaks, no battery changes, no battery gases, no separate battery room
- EVE Energy — LF105 cell datasheet — ≥3,500 cycles at 1C/1C and 25 °C to 80% capacity; charge 0–55 °C, discharge −20–55 °C
- Battery University — How heat and loading affect battery life — each 8 °C rise halves the life of a sealed lead-acid battery
- IATA — Lithium batteries fact sheet — lithium cells and batteries must pass the tests of UN Manual of Tests and Criteria subsection 38.3


