Thunderbolt repairs, repacks and replaces lithium battery packs in our Dubai workshop: new 18650, 21700 or LiFePO₄ cells in your existing case, BMS replacement, balancing and a measured capacity on our test bench. We also build prototypes and small series of new packs. We serve customers in Dubai and deliver across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman.
What our battery pack repair and replacement service includes
When a lithium pack loses its range, cuts out under load or stops charging, the usual answer is a new battery from the maker — if the maker still sells one. We rebuild the pack instead: the case, the connectors and the fit stay, and everything that wears out inside is new. You get:
- Diagnosis. We open the pack, measure every cell group, check the BMS and the welds, and tell you what failed and whether a rebuild makes sense.
- A repack with new cells. New grade-A cells — 18650 or 21700 Li-ion, or prismatic LiFePO₄ — matched before assembly, spot-welded with nickel strip or bolted to busbars, and insulated properly.
- BMS replacement or upgrade. A new BMS sized to the device's current, often a smart BMS with Bluetooth and active balancing, or the existing BMS if it passes our tests.
- More capacity or current where it fits. Newer cells hold more energy, so a rebuilt pack can often go further than the original in the same case.
- A capacity test and its log. Every rebuilt pack is charged, balanced and discharged on our bench before it goes back; you receive the measured capacity.
- Prototypes and small series. New packs for a product in development, with the holders, case and wiring designed for it, and repeat builds once the design is proven.
- Warranty. Up to 36 months on components and workmanship, stated in the order.
What we do not repair
“Battery replacement” in Dubai mostly means two things we do not do, so to save you a trip:
- Car starter batteries. We do not sell, jump-start or replace the 12 V lead-acid starter battery in a petrol or diesel car. A roadside battery service or your garage does that in minutes.
- Phones, phone screens and laptops. We do not repair phones or replace their screens or built-in batteries; a phone repair shop or the manufacturer's service centre is the right place.
What we do repair is lithium battery packs built from many cells: e-scooters and e-bikes, electric wheelchairs, robots and AGVs, marine and boat packs, golf cart and traction batteries, power stations, UPS and solar modules, drones, tools and industrial equipment. For hybrid and EV traction batteries see our page on EV and hybrid battery packs.
Who it is for
| Customer | What they need | Typical work |
|---|---|---|
| E-scooter and e-bike riders | The range back, or more, in the original case | 36–72 V Li-ion repack, 10–40 Ah |
| Fleets and rental operators | Packs rebuilt in batches instead of new imports | repack series, smart BMS |
| Owners of discontinued equipment | A pack the maker no longer sells | a new pack to the old case and connector |
| Companies with industrial packs | Robots, medical carts, marine or UPS modules back in service | cell and BMS replacement, capacity test |
| Start-ups and engineering teams | A working prototype pack, then a small series | design, holders, case, BMS, test logs |
Why repack instead of buying a new battery
- The case and fit stay. The rebuilt pack drops back into the device with the same mounts, connectors and charger.
- Often more range than new. Today's cells often hold more than those in an older pack; we have rebuilt packs from 12 Ah to 20 Ah in the original case.
- You know what is inside. We have opened “new” packs with used, sanded cells, sticky tape for insulation and burn marks from a short circuit. After a repack, you have our cell list and a test log.
- Old batteries kept going. For equipment the maker has discontinued, a repack is often the only way to keep it working.
How it works: from a dead pack to a tested one
- Brief. Send photos of the pack and its label, the device it powers and what goes wrong — by WhatsApp or the quote form — or bring it to our workshop in Dubai Production City.
- Diagnosis and costed proposal. We measure the cell groups, the BMS and the welds, then propose the cells, the BMS, the capacity you will get, the warranty, the price and the date.
- Repack. The old cells come out; new matched cells go in, welded and insulated, with the BMS and wiring.
- Capacity test. Each pack is charged, balanced and discharged; you receive the measured capacity.
- Pickup or delivery. Rebuilds start from two working days; larger packs and series take longer, and the date is in the quote. Pickup in Dubai or delivery under our delivery policy.
- Support. With a smart BMS, questions are answered from its data in the phone app.
Why Thunderbolt
- A battery workshop, not a phone shop. Cell matching, spot welding, BMS programming and load testing are what we do every day; we have shipped more than 1,200 packs.
- No used cells. We do not build packs from second-hand cells, because a rebuild is only as good as its weakest cell.
- Balanced and tested, every time. Every pack is balanced before it leaves, including those on standard BMS boards, and every pack gets a capacity test.
- Engineering when the pack is not standard. Custom holders, guide rails and cases for packs that have to fit an old housing.
Battery pack repair: what can and cannot be fixed
| Symptom | Usual cause | What we do |
|---|---|---|
| Range has fallen, charger shows full quickly | aged cells, lost capacity | repack with new cells |
| Cuts out under load or on hills, recovers after rest | a weak cell group or high internal resistance; a BMS current limit | find the group; repack or replace the BMS |
| Won't charge, or charges to a low voltage | BMS in protection after a deep discharge; one group far below the others | diagnose; recover only if no cell fell below the maker's minimum voltage, otherwise repack |
| Groups drift apart in the app | imbalance, weak balancing on a standard BMS | balance; add an active balancer or a smart BMS |
| Swollen, leaking or burnt cells; water got in | damaged cells | full repack; damaged cells are never reused |
| Broken connector, cable or weld | mechanical damage, vibration | repair, then a capacity test |
Battery replacement in Dubai: replacing a few cells or the whole pack?
The tempting repair is to swap only the dead cells. In a series pack it rarely lasts. The weakest group decides the capacity of the whole string; Battery University explains that a weak cell is at a disadvantage on both charge and discharge and gives ±2.5% of capacity as the typical tolerance between cells in an industrial battery. New cells next to aged ones are not matched, so the old ones become the new weak point within months. Our rule: if the cells have aged, all of them are replaced; if one group was damaged in an otherwise young pack, we test the rest before deciding. Either way, you see the measurements first.
18650 lithium battery packs: cells, welding and holders
An 18650 is a cylindrical Li-ion cell 18 mm in diameter and 65 mm long; its larger sibling, the 21700, holds about 40–50% more energy in today's production cells. Most scooter, e-bike, tool and power-station packs are built from dozens or hundreds of them, in series groups of parallel cells — “10S4P” means ten groups in series, four cells in each. What makes an 18650 pack last:
- Genuine grade-A cells from established makers (we use LG, Samsung, EVE and others), new, from a current batch, matched before welding.
- Spot welding, not soldering. Heat from a soldering iron damages cells; we spot-weld nickel strip sized to the current — for example 0.15 mm strip between groups and 0.2 mm in two layers on the main poles.
- Holders and insulation. Plastic holders keep the cells apart; fish-paper rings, fibreglass sheet and heat-shrink sleeving with end insulation keep a sharp edge from causing a short.
- Protected wiring. Balance leads routed in a plastic channel, trimmed to length, so vibration cannot chafe them.
BMS replacement and battery balancing
The BMS protects every cell group from over-charge, over-discharge, over-current and heat, and it is often what fails or limits an old pack. We replace it with a board sized to the device's real peak and continuous current. A smart BMS with Bluetooth shows every group's voltage in a phone app, so a fault can be seen before it strands you; an active balancer of 1–5 A keeps large packs equal far faster than the small passive balancing built into most boards. If an existing BMS tests well, we keep it — there is no point throwing away a working board.
LiFePO₄ or Li-ion for the rebuilt pack?
| Li-ion (NMC/NCA, 18650/21700) | LiFePO₄ (prismatic or cylindrical) | |
|---|---|---|
| Energy per kg and per litre | high — fits small cases | lower — needs more space |
| Cycle life | hundreds to about 1,000+ | thousands (our 105 Ah cells: ≥3,500 at 25 °C) |
| Heat tolerance | moderate | the most stable common lithium chemistry |
| Where it fits | scooters, e-bikes, tools, drones, power banks | traction, marine, solar, UPS, carts, robots |
A repack usually keeps the original chemistry and voltage so the charger and controller still match. Where there is space — boxes for boats, carts or storage — we often move a pack to LiFePO₄ for its life and heat tolerance — with a charger to match.
Repacking for Gulf heat
Heat is the main reason packs in the Gulf die young: a scooter left in a car or a pack on a balcony in summer spends hours above the temperatures its cells were tested at. The LiFePO₄ cells we use, for example, are rated to charge only between 0 and 55 °C. In a rebuild we add temperature sensors to the BMS, choose cells with heat margin, and leave space for air where the case allows. The best repair is still prevention: charge in the shade, store at part charge, and do not leave the pack in a parked car.
Prototypes and small series
The same bench that rebuilds packs builds new ones. For a product in development we design the cell layout, model and print the holders, make the case and wiring, select and program the BMS, and test the pack to its real load. Once the prototype works in the device, we build the series to the same drawings. Examples from our work include 3D-printed cell holders for subsea packs and a one-off fibreglass guide rail that holds a pack and its BMS inside an old cassette case without glue or tape.
Battery replacement price in Dubai: what drives the cost
- The number and type of cells. Most of the cost is the cells; a 36 V scooter pack needs far fewer than a 72 V motorcycle battery.
- The BMS. Reusing a tested board costs nothing; a smart BMS with active balancing costs more than a standard board.
- Labour and fit. A pack that must fit an odd case, or needs custom holders, takes longer than a standard layout.
- Extra capacity or current. More cells or higher-current cells cost more.
- Repack vs a new original. A repack usually costs less than an original replacement, and often holds more.
Send photos and the label, and we return a costed proposal — request a quote.
Battery repair across the UAE and the GCC
Our workshop is in Dubai Production City, where you can bring a pack in. From the other Emirates and from Saudi Arabia, Qatar, Kuwait, Bahrain and Oman, packs can be sent to us and returned as Class 9 dangerous goods under our delivery policy; damaged, swollen or leaking packs cannot go by air and need special packaging by road, so send photos first and we will advise.
Safety and standards
A rebuilt pack is a new battery and is treated like one. For portable lithium packs, IEC 62133-2 sets the safety requirements and tests; for industrial and motive packs, IEC 62619; for e-bike and scooter packs, EN 50604-1 and UL 2271. These are the references we design to. For transport, lithium cells must pass the tests of subsection 38.3 of the UN Manual of Tests and Criteria; the new cells we use have passed them, and a rebuilt pack is shipped under the rules that apply to its size and production run. Thunderbolt is certified to supply batteries to the aviation industry. Every pack leaves after a capacity test.
Related applications
Rebuilds are part of every field we work in: e-scooter and e-bike batteries, portable power stations and power banks, RC and FPV packs, robot and drone packs, marine and boat batteries, golf cart batteries, forklift and AGV batteries and eVTOL and aviation batteries. For new storage systems, see solar battery storage and our 20 kW UPS project.
From our work
- 36 V 10 Ah e-bike pack rebuilt in its own holder: the old pack had damaged insulation, leaking cells and degraded chemistry. We kept its plastic holder, rebuilt it as 10S4P on new cells with a new BMS, and measured 9.9 Ah of the 10 Ah design on the capacity test.
- A new 36 V 12.5 Ah pack in an old e-bike case: the old pack was wrapped in clear tape with no heat-shrink, with untrimmed wires and doubtful welds. The new one is 10S5P on 18650 cells, groups welded with 0.15 mm strip and the poles with 0.2 mm strip in two layers, the wiring in a plastic channel, in a fibreglass shell with heat-shrink and end insulation.
- 60 V Li-ion pack upgraded in its original cassette case: capacity from 12 Ah to 20 Ah and current from 24 A to 40 A, held by a fibreglass guide rail we designed and cut for this one order, which also carries the BMS.
- Free cells are rarely free: a customer brought a set of used 105 Ah LiFePO₄ cells and a BMS. Within 10 days three cells showed self-discharge, and at 40 A the set gave only 8 Ah of 105. We built the pack on new cells, kept the BMS because it passed our tests, added an active balancer, and measured 110.4 Ah.
- What was inside a “never opened” pack: tape instead of heat-shrink, sanded second-hand cells, no internal insulation, a short-circuit mark on a strip and random welds. We built two new packs, 36 V 23 Ah and 48 V 17 Ah, with smart BMS in the two old cases, plus fast chargers.
- A 12 V lead-acid block replaced by lithium: a 12 Ah lead-acid battery that had lost almost all its capacity was replaced by a 12 V 50 Ah Li-ion NMC pack in a children's electric car — about four times the capacity the original had even when it was new.
What to send us for a quote
- Photos of the pack, its label and its connector, and the device it powers.
- What goes wrong: range, cut-outs, not charging, damage — and how old the pack is.
- Whether you want the original capacity or more, and any size limit.
- For prototypes: voltage, capacity, peak and continuous current, size and weight limits, and the quantity.
Send it by WhatsApp or through the quote form, or bring the pack to Dubai Production City — we reply on WhatsApp during working hours.
Frequently asked questions
Can a lithium battery pack be repaired?
Usually yes. Most failing packs have aged cells, one weak group or a faulty BMS. We measure each group and the BMS, then rebuild the pack with new matched cells and a new or tested BMS, and prove the result with a capacity test.
Do you replace car batteries in Dubai?
No. We do not sell or replace 12 V starter batteries for petrol or diesel cars; a roadside battery service or your garage does that. For hybrid and EV traction batteries, see our EV and hybrid battery page.
Do you repair phones or replace phone screens?
No. We work on lithium battery packs made of many cells — scooters, e-bikes, robots, boats, carts, power stations and industrial equipment — not phones, screens or laptops.
Can you repair my e-scooter battery?
Yes. We rebuild scooter packs with new 18650 or 21700 cells in the original case, a new BMS if needed, and a capacity test. Often the rebuilt pack holds more than the original.
Can you replace only the dead cells?
In an aged pack it rarely lasts, because new cells next to old ones are not matched and the old ones fail next. We replace all the cells when they have aged, and test the rest when one group was damaged in a young pack.
What is an 18650 lithium battery?
A cylindrical Li-ion cell 18 mm in diameter and 65 mm long. Packs for scooters, e-bikes, tools and power stations are built from many of them in series groups of parallel cells, spot-welded with nickel strip.
How much does battery pack replacement cost in Dubai?
It depends mainly on the number and type of cells, the BMS, and how hard the pack is to fit. A repack usually costs less than an original replacement. Send photos and the label and Thunderbolt returns a costed proposal.
How long does a battery repack take?
Rebuilds start from two working days; larger packs and series take longer, and the date is in the quote.
Do you build prototype battery packs?
Yes. We design the cell layout, print the holders, build the case and wiring, program the BMS and test the pack to its real load, then build the small series to the same design.
Sources
- Battery University — BU-803a: Cell matching and balancing — weak cells in a series string; capacity tolerance of ±2.5% between cells in an industrial battery
- Battery University — BU-301a: Types of battery cells — 18650 cell is 18 mm in diameter and 65 mm long
- IEC 62133-2:2017+AMD1:2021 — safety requirements for portable sealed lithium cells and batteries
- IEC 62619:2022 — safety requirements for lithium cells and batteries in industrial and motive applications
- EVE Energy — LF105 cell datasheet — ≥3,500 cycles at 1C/1C and 25 °C to 80% capacity; charge 0–55 °C
- IATA — Lithium batteries fact sheet — lithium cells and batteries must pass the tests of UN Manual of Tests and Criteria subsection 38.3


