Thunderbolt designs, builds and load-tests custom battery packs for electric vehicles in our Dubai workshop: traction packs up to 96 V for low-speed and utility EVs, conversions, buggies and prototypes; and 12–24 V auxiliary packs for vans, off-road and service vehicles. Every pack has a smart BMS, is balanced and capacity-tested per unit, and is delivered across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman.
What our EV battery service includes
An electric vehicle lives or dies by its battery. We do not resell boxed modules: we engineer the pack for your vehicle, its controller and the way it is driven, and hand it over tested. Depending on the job, you get:
- Engineering. Voltage, capacity and peak current worked out from your motor, controller and duty cycle; the choice of cells, BMS, enclosure and connectors; a costed proposal with a date.
- A custom traction pack. New grade-A LiFePO₄ or Li-ion cells, matched before assembly, in a pack shaped to the space you have — under a seat, in a floor tray or in an existing battery box.
- An auxiliary pack. 12 V or 24 V LiFePO₄ for the house loads of a van, an expedition or service vehicle, winches, fridges, lights and tools.
- Controller and charger integration. The BMS set to the controller's voltage window and current limits; CAN or RS485 where the vehicle can use it; a charger matched to the pack.
- A load test and its log. Every pack we build is charged, balanced and discharged at its working current in our workshop, so you see its real capacity before it leaves.
- Warranty and service. Up to 36 months on components and workmanship, stated in the order.
Who it is for
| Customer | What they need | Typical pack |
|---|---|---|
| Resorts, campuses, hotels and industrial sites | Utility EVs, buggies and shuttles that run a full shift and charge overnight | 48–72 V, 100–200 Ah LiFePO₄ |
| EV conversion builders and workshops | A traction pack shaped to the car, with a BMS that talks to the controller | 48–96 V, LiFePO₄ or Li-ion |
| Universities, start-ups and R&D teams | Prototype packs for student racing cars, autonomous platforms and test rigs | 24–96 V, built to drawing |
| Van, overland and service-vehicle owners | An auxiliary battery that runs fridges, lights, tools and an inverter without killing the starter battery | 12–24 V, 100–300 Ah LiFePO₄ |
Why a custom EV battery pack
- The vehicle you have, not the pack a catalogue has. Low-speed EVs, buggies and conversions often use voltages and box sizes no off-the-shelf battery fits. We build to the millimetre.
- Lead-acid out, lithium in. Many utility vehicles still run on lead-acid that sags under load and ages fast in heat. A LiFePO₄ pack of the same voltage and amp-hour rating gives more usable energy, less weight and no watering.
- More range in the same space. Choosing denser cells or a better layout often adds capacity without changing the vehicle.
- A BMS you can read. Smart BMS with Bluetooth or CAN shows every cell, so faults are found from data, not by guessing.
How it works: from brief to a tested EV battery
- Brief. You send the vehicle, the motor and controller models, the current battery's voltage and size, photos of the battery space and how far and how hard the vehicle is driven — by WhatsApp or the quote form.
- Engineering and costed proposal. The pack configuration, cells and their datasheet, BMS and its limits, enclosure, connectors, charger, warranty, price and date.
- Assembly. Cell matching, welding or busbar assembly, BMS programming for your controller, in our Dubai workshop.
- Capacity and load test. Full charge, balancing and a discharge at working current, with temperatures checked on the cells, the BMS and the terminals.
- Delivery or pickup. Builds start from two working days; larger traction packs take longer, and the date is in the quote.
- Support. Questions are answered from the BMS data; capacity tests and service when needed.
Why Thunderbolt
- Built and tested in Dubai. The pack is designed for your vehicle and the Gulf climate, and we can service it locally.
- Traction experience. We build LiFePO₄ and Li-ion traction packs from 24 to 96 V for utility vehicles, golf carts, robotic platforms and electric motorcycles.
- Engineers on the brief. The person who sizes the pack is the one who builds and tests it.
- Straight answers on OEM packs. If a car's own pack is the right fix, we say so instead of selling you a custom build.
EV battery packs we build
Our packs cover 3.6 to 96 V. Typical builds for vehicles:
| Pack | Voltage | Capacity | Typical use |
|---|---|---|---|
| Utility EV / buggy traction pack | 48–72 V | 100–200 Ah | Resort and campus vehicles, site carts, shuttles |
| Conversion or prototype pack | 48–96 V | to the vehicle's range target | EV conversions, student racing cars, test platforms |
| Electric motorcycle pack | 60–72 V | 30–85 Ah | E-mopeds and motorcycles |
| Auxiliary / house pack | 12–24 V | 100–300 Ah | Vans, overland and service vehicles, camper conversions |
Road-going passenger EVs such as a Tesla run high-voltage packs, far above 96 V, that are integrated into the car's own battery management and safety systems. We do not build or repair OEM packs for them; the section below explains where to go instead.
Hybrid battery price and Tesla battery replacement: where to go
Most Toyota hybrids use nickel-metal hydride (NiMH) packs, and the plug-in models use lithium-ion, as Toyota explains. A hybrid or EV pack is many modules in series, tied into the car's own battery management and safety systems, so its repair or replacement belongs with the manufacturer's service network or a garage qualified for high-voltage work. We do not repair or replace these packs. What we can build for such a car is everything around the traction pack: a 12–24 V auxiliary or accessory battery, or a separate power system for added equipment.
Before paying for a new pack, check your car's battery warranty: hybrid and EV packs often carry a long manufacturer warranty — Toyota Canada, for example, quotes 10 years or 240,000 km on its hybrid batteries. Terms differ by country and model, so ask your dealer.
EV battery chemistry: LiFePO₄, NMC, LTO or NiMH
Chemistry sets the weight, the life and the price of a traction pack. Lithium iron phosphate has become the most-used EV chemistry: the International Energy Agency reports that LFP made up over 55% of EV batteries deployed in 2025, with LFP cells reaching up to 205 Wh/kg against up to 265 Wh/kg for NMC.
| Chemistry | Strength | Weakness | Where it fits |
|---|---|---|---|
| LiFePO₄ | Long cycle life, among the most thermally stable lithium options | Heavier per kWh than NMC | Utility EVs, buggies, fleets, auxiliary packs |
| Li-ion NMC | Highest energy per kilogram | Shorter life, needs more care in heat | Conversions and motorcycles where weight and space decide |
| LTO | Very fast charging, very many cycles | Low energy density, high cost per kWh | Shuttles that charge many times a day |
| NiMH | Robust and proven in hybrids | Low energy density, self-discharge | Factory hybrid packs |
For most vehicles in the Gulf we recommend LiFePO₄; we choose NMC when every kilogram counts, and state the cells and their datasheet in the quote.
EV batteries in Gulf heat, dust and humidity
A vehicle parked in the summer sun heats its battery far above the air temperature, and every cell ages faster when hot. So the design starts with heat:
- Placement and airflow. We keep the pack away from the motor and exhaust heat where we can, and leave air paths or add ventilation.
- BMS temperature limits. External temperature sensors on the cells; the BMS reduces or stops charging before the cells are at risk and limits discharge if they overheat.
- Charging discipline. A pack that has just finished a hot shift should cool before a fast charge; we set the charger and BMS so it does.
- Dust, water and salt. Sealed enclosures, sealed connectors and coated busbars for vehicles that work on sand, by the sea or are washed down.
Inside a custom traction battery pack
- Cells. New grade-A cells from established manufacturers — prismatic LiFePO₄ or cylindrical 21700 Li-ion — checked for voltage and internal resistance and matched before assembly. Prismatic cells sit in compression holders; cylindrical cells in plastic holders with spot-welded nickel or copper connections.
- BMS. Protection of every cell against over- and under-voltage, over-current, short circuit and temperature, sized for the controller's peak current. Smart BMS with Bluetooth as standard, CAN or RS485 when the controller or a display needs data, and an active balancer on large packs.
- Power path. Copper busbars and cables sized for continuous and peak current, a fuse or breaker, and power connectors such as Anderson for traction leads.
- Enclosure. Steel, aluminium or composite cases built to the battery space, sealed where the vehicle needs it, with mounting points that match the vehicle.
- Display. An external state-of-charge display can be brought out to the dashboard.
Compatibility: controllers, chargers and CAN
A traction pack has to match the motor controller's voltage window and peak current, and the charger's voltage and current. Before quoting we check the controller's minimum and maximum voltage, its peak and continuous current and whether it reads battery data over CAN or RS485. We then set the BMS cut-offs so the controller, not the BMS, limits power in normal driving — a BMS that trips under hard acceleration strands the vehicle. We supply a matched charger or set the pack to the one you have.
For the car's own 12 V system, a lithium battery is only a good idea if the car's charging system supports it. Many modern EVs and hybrids manage their low-voltage battery closely, so for those we recommend the manufacturer's part; our 12–24 V packs are for auxiliary and house loads.
How to size an EV battery: a worked example
A resort shuttle must run a 60 km shift. Its controller log shows an average of 150 Wh per kilometre and a peak of 10 kW on the hill to the car park; the vehicle runs at 72 V.
usable depth of discharge ≈ 85% → 9.0 ÷ 0.85 ≈ 10.6 kWh installed
72 V × 150 Ah = 10.8 kWh → one 72 V 150 Ah LiFePO₄ pack
peak: 10,000 W ÷ 72 V ≈ 139 A at nominal voltage, about 150 A on a nearly empty pack → BMS rated 200 A, or the controller limited to 150 A
Then we check the recharge: a 75 A charger (about 6 kW, so it needs a suitable supply) refills 150 Ah in about two hours of constant-current charging, so the shuttle can recharge at lunch as well as overnight. Your vehicle's real consumption is the number that matters — we ask for it, or measure it from the controller.
EV battery price in the UAE: what drives the cost
People search for a hybrid battery price, a Tesla battery replacement cost or a Tesla Model 3 battery price. For a passenger car's own high-voltage pack the price is set by the manufacturer and its dealers; what we can change is whether you need a whole new pack at all. For custom packs, the cost depends on:
- Usable kilowatt-hours. Cost scales with energy; battery pack prices fell 8% in 2025 according to the IEA.
- Chemistry. The IEA found LFP packs over 40% cheaper per kWh than NMC in 2025; NMC costs more but saves weight.
- Peak current. A pack for a hill-climbing vehicle needs a larger BMS, heavier busbars and cables.
- Enclosure and sealing. A sealed steel box with mounting points costs more than a pack in an existing tray.
- Testing and paperwork. Every pack is capacity-tested; extra documents for a tender or an inspection are quoted with the pack.
Send us the brief and we return a costed proposal — request a quote.
EV batteries across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman
We build in Dubai and deliver to all seven Emirates and to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman as Class 9 dangerous goods under our delivery policy. Resorts, campuses and industrial sites across the region run utility EVs that suit LiFePO₄; desert and coastal sites ask for more sealing; long distances between sites make a pack that can be read remotely over Bluetooth more valuable. Road registration of a converted vehicle is a matter for the local traffic authority in each country; we supply the pack data your engineer or inspector needs.
Safety and standards for EV batteries
For road vehicles, the battery-safety reference is UN Regulation No. 100, which tests the rechargeable energy storage system for short circuit, overcharge, vibration, shock, temperature and fire resistance — summarised by Battery Design. Cell performance and life tests for EV propulsion are set out in IEC 62660-1. For off-road motive uses such as golf carts and AGVs, IEC 62619 gives the safety requirements for industrial lithium batteries. For transport, the cells we use have passed the UN 38.3 tests. The finished pack is shipped as Class 9 dangerous goods under the rules that apply to its size and production run. We use these references as design guidance; our packs are not type-approved or certified to them unless the quote says so. If your project needs specific certificates for type approval or a tender, tell us at the brief stage.
Related applications
The same traction engineering runs in our golf cart batteries, delivery bike and electric motorcycle batteries, forklift and AGV batteries and 24 V bus and truck batteries. Auxiliary power for vehicles is covered on our caravan and RV page, and work on existing packs on battery pack repair and replacement. For where EV cells are heading, read our article on 1,000 km EV batteries and semi-solid-state cells.
From our work
- 72 V 150 Ah LiFePO₄ traction battery: 435 × 405 × 220 mm, 76 kg, 10,800 W, 150 A maximum discharge and 75 A charge, active balancing and Bluetooth, supplied with a 10 A charger.
- 60 V 105 Ah LiFePO₄ golf cart pack: smart BMS with active balancing, 480 × 280 × 220 mm, about 48.5 kg.
- 48 V 105 Ah traction pack for a tracked robotic platform: grade-A cells in compression holders, active balancing, external temperature sensors and a battery-to-controller link over RS485 and CAN — read the project.
- 72 V 85 Ah Li-ion pack for an electric motorcycle: 340 cylindrical 21700 cells in holders, 5,440 weld points, smart BMS, a separate active balancer, a dashboard display and AWG6 leads with an Anderson connector; 415 × 252 × 180 mm, about 31.5 kg.
- Auxiliary power for an expedition vehicle: three LiFePO₄ packs, 22 kWh, with a 5 kW sine-wave inverter — read the project. And a 12 V 105 Ah LiFePO₄ expedition battery in a sealed, serviceable case with a charge display, USB-A/C ports and a 12 V socket.
What to send us for a quote
- The vehicle, and the motor and controller models with their voltage and current ratings.
- The current battery: voltage, capacity, chemistry, and photos and dimensions of the battery space.
- How the vehicle is used: distance or hours per shift, hills, loads, and when it can charge.
- The country and city where the vehicle works.
Send it by WhatsApp or through the quote form — we reply on WhatsApp during working hours with questions or a costed proposal.
Frequently asked questions
Do you replace Tesla batteries?
No. A Tesla's high-voltage pack is integrated with the car's own systems, and a new pack comes from Tesla's service network. We build custom traction packs up to 96 V and auxiliary batteries, not OEM replacement packs.
What is the Tesla battery replacement cost in the UAE?
The price of a new OEM pack is set by Tesla and depends on the model and warranty status, so check with Tesla service first — many packs are still under warranty. We do not quote OEM pack prices.
What is the hybrid battery price, and can a hybrid battery be repaired?
The price of a hybrid pack is set by the car maker and depends on the model. Hybrid packs often carry a long manufacturer warranty, so check it with your dealer before paying for a repair or a replacement. Thunderbolt does not repair OEM hybrid packs; we build custom traction and auxiliary packs.
Can you build a battery for my electric vehicle conversion?
Yes, up to 96 V. Send us the motor and controller models, the space available and the range you want; we size the pack, set the BMS to the controller and test it before delivery.
Which battery is best for a utility EV or buggy in the Gulf?
Usually LiFePO₄: its cells are rated for thousands of cycles, it is the most thermally stable of the common lithium chemistries and needs no watering. NMC makes sense only when weight or space is tight.
Can I replace my car's 12 V battery with lithium?
Only if the car's charging system supports it. Many modern EVs and hybrids manage the low-voltage battery closely, so we recommend the manufacturer's part for them. Our 12–24 V LiFePO₄ packs are for auxiliary and house loads in vans and service vehicles.
How long does a custom EV battery take?
Simple packs are built and tested from two working days; larger traction packs take longer, and the date is stated in the quote.
Do you deliver EV batteries to Saudi Arabia, Qatar or Oman?
Yes. We deliver across all seven Emirates and ship to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman as Class 9 dangerous goods; the method and date are in the quote.
Sources
- International Energy Agency — Global EV Outlook 2026: Electric vehicle batteries — LFP over 55% of EV batteries in 2025; pack prices down 8%; LFP packs over 40% cheaper per kWh than NMC; cell energy densities
- Toyota Canada — Hybrid Electric Batteries: What to Know — NiMH in most Toyota hybrids, Li-ion in plug-ins; 10-year / 240,000 km hybrid battery warranty in Canada
- IEC 62660-1:2018 — performance testing of lithium-ion cells for the propulsion of electric road vehicles
- IEC 62619 — safety of industrial lithium batteries, including golf carts and AGVs, excluding road vehicles
- Battery Design — UN Regulation 100 — REESS safety tests for electric vehicles under UN R100
- Battery Design — UN 38.3 transport test — the eight UN 38.3 transport tests for lithium cells and batteries


