Thunderbolt builds custom portable power stations, high-capacity power banks and battery packs for devices and equipment in our Dubai workshop, and repacks worn tool and equipment batteries with new cells. We are not a phone repair shop: we engineer packs — the capacity, the outputs, the case and the BMS your use needs — capacity-test every one, and deliver across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman.
What our device and portable power battery service includes
Off-the-shelf power stations and power banks are built for an average buyer. When you need more capacity, a different voltage, a case that fits a vehicle or a pelican box, outputs for one specific device, or a battery for equipment nobody sells spares for, a custom pack is the answer. You get:
- Engineering. Sizing from the devices you power and for how long, the choice of chemistry, cells, BMS, outputs and case, and a costed proposal.
- The pack. New grade-A cells — LiFePO₄ for power stations, Li-ion for light packs — matched before assembly, with a BMS that protects every cell.
- The outputs you need. AC sockets through a built-in inverter, USB-A and USB-C, a 12 V car socket, DC outputs at 12 V or 24 V, a display or Bluetooth monitoring.
- Charging. Mains charging, a solar charge controller inside the case, car charging, or a separate fast charger.
- Repacking. New cells inside the original case of a tool or equipment battery where its electronics allow it.
- A capacity test and its log. Every pack is charged, balanced and discharged before it leaves; warranty up to 36 months on components and workmanship, stated in the order.
Who it is for
| Customer | What they need | Typical pack |
|---|---|---|
| Desert campers and overlanders | A power station for a fridge, lights, fans and phones, charged by solar or the car | LiFePO₄, 1.3–7.2 kWh, AC + USB + 12 V |
| Film, events and field crews | Quiet power for cameras, lights, laptops and radios where there is no socket | LiFePO₄, 1.3–3.6 kWh, or Li-ion packs by device |
| Equipment makers and integrators | A battery pack designed into a product: a tool, an instrument, a cart, a kiosk | Li-ion or LiFePO₄, 3.6–48 V, to the drawing |
| Workshops and contractors | Worn tool and equipment batteries rebuilt with new cells | Repack in the original case |
| Labs and service companies | Packs for measuring instruments and medical or test equipment without available spares | Li-ion, NiMH or LiFePO₄, to the original |
Why a custom portable power pack
- Capacity you choose. From a power bank to a 7.2 kWh station on wheels — sized to your devices, not to a catalogue.
- LiFePO₄ where it matters. For stations that travel in a car or stand in a tent, LiFePO₄ is the most thermally stable common lithium chemistry and lasts thousands of cycles.
- Serviceable. Our cases open; a cell, a BMS or an inverter can be replaced instead of throwing away the whole unit.
- Known cells, known test. A Canadian study of replacement power-tool and phone batteries found that half of the third-party sets it bought failed the UN 38.3 transport tests, some with fire (Transport Canada). We build on new grade-A cells and measure every pack.
How it works: from brief to a working pack
- Brief. You send the devices, their power and how long they must run, how you will charge, and a photo of the old battery if it is a replacement — by WhatsApp or the quote form.
- Engineering and proposal. The pack configuration, the cells and their datasheet, the outputs, the warranty, the price and the date.
- Assembly. Cell matching, welding or busbar assembly, BMS and outputs, in our Dubai workshop.
- Capacity test. Each pack is charged, balanced and discharged; you receive the measured capacity.
- Delivery or pickup. Builds start from two working days; larger stations take longer and the date is in the quote.
- Support. Service, cell replacement and capacity tests when needed.
Why Thunderbolt
- Battery engineers, not a phone shop. We build packs from cells; we do not swap phone batteries or repair screens.
- Built here, not imported. Assembled and tested in Dubai, serviced locally.
- Any chemistry the job needs. Li-ion, LiFePO₄, LTO and NiMH, from 3.6 V to 96 V.
- Proof before delivery. A measured capacity for every pack.
Portable power stations and battery packs we build
| Product | Voltage / output | Capacity | Typical use |
|---|---|---|---|
| Power bank / device pack | USB-C, USB-A, DC to the device | by the device | Cameras, radios, instruments, lights |
| 12 V battery box | 12 V, USB, car socket | 1.3–2.7 kWh (12V 105–210Ah) | Camping fridges, lights, small boats |
| Portable power station | AC via inverter, USB, 12 V | 1.3–3.6 kWh | Camping, events, home backup for essentials |
| Mobile power station | AC up to 2.5 kW, DC | 3.6–7.2 kWh | Site work, long trips, film crews |
| Equipment pack | 3.6–48 V | to the drawing | Tools, carts, kiosks, test equipment |
These are typical builds, not limits. If your device needs an unusual voltage or the pack has to fit an existing case, that is what a custom build is for.
Portable power station with solar panel
A portable power station with a solar panel is the most-asked setup for camping and desert trips. What makes it work is the match between three parts:
- The battery. Sized for the night: what the fridge, the lights and the fan use after sunset.
- The charge controller. Built into the case and sized to the panel, so the station charges from the sun without a separate box.
- The panel. Large enough to refill the battery in one day — in summer the Gulf sun usually allows it, but dust on the panel and shade cut it, so we size with a margin.
For a vehicle or a caravan with fixed wiring, see our page on caravan and RV off-grid power; for a villa, solar battery storage.
How to size a portable power station: a worked example
A desert camp for one night: a 12 V compressor fridge averaging 50 W, LED lights at 30 W, a fan at 40 W and phone and laptop charging at 30 W, for 12 hours.
150 W × 12 h = 1,800 Wh
÷ 0.9 for inverter and converter losses (an assumption) ≈ 2,000 Wh
÷ 0.9 usable depth of discharge ≈ 2,220 Wh installed
12.8 V × 210 Ah = 2,690 Wh → a 12V 210Ah LiFePO₄ station, with a margin
Then the peak: the inverter must start the fridge compressor and anything with a motor, so we check the inverter rating and the BMS current. And the recharge: about 2.0 kWh back from the panel and the car the next day.
Power bank: custom packs, not phone accessories
Power bank is one of the most searched battery words in the UAE. We do not compete with the shelf of phone power banks in a mall; we build the packs a shop cannot sell you: a high-capacity bank for a camera rig, a pack with the exact DC voltage of an instrument, a USB-C bank built into a case or a kiosk, a pack that has to survive a hot car.
If it has to fly, mind the airline rules. Since 1 October 2025 Emirates allows one power bank under 100 Wh per passenger, in cabin baggage only, and does not allow it to be used or charged on board (Dubai Media Office). 100 Wh is about 27,000 mAh at the usual 3.7 V rating (100 ÷ 3.7 ≈ 27 Ah), so large custom banks are for the ground, not the cabin.
Laptop battery health check: when to replace it
A laptop battery health check comes down to two numbers: the full-charge capacity against the design capacity, and the cycle count. Most laptops report both in their system information or battery report. When the gap between the two no longer leaves you enough runtime for your day, or the battery swells, it is due for replacement.
- Heat and full charge age it fastest. Li-ion kept at 100% charge and 40 °C keeps an estimated 65% of its capacity after a year, against 85% at 40% charge (Battery University). A laptop left on charge in a hot car or on a sunny desk ages quickly.
- What we do not do. We do not repack laptop batteries: many carry a chip that stores the cycle count and may lock the pack after a cell change. A genuine replacement from the laptop maker is the right choice.
- Swollen batteries. Stop using a swollen battery, do not charge it, and keep it away from anything that burns until it is replaced.
Battery replacement for tools and equipment: repacking
"Battery replacement" outranks "battery repair" in UAE searches by far, and for good reason: what most people need is a battery that works again. For tools, instruments and equipment, repacking — new cells inside the original case, with the original connector — is often faster and better than hunting for a spare. We open the pack, check the BMS or the protection board, replace all the cells with new matched ones (never a mix of old and new), test the capacity and close the case. If the case or the electronics are damaged, we build a new pack to the same size. We have opened enough packs to know why it matters: unprotected wiring, tape instead of heat-shrink, sanded second-hand cells and signs of a short circuit inside cases that looked fine. For larger repacks — e-bike, industrial and traction batteries — see our battery repair and replacement service.
Battery chemistry for portable power: LiFePO₄, Li-ion or NiMH
| Chemistry | Strength | Where we use it |
|---|---|---|
| LiFePO₄ | Thermal stability, thousands of cycles | Power stations, battery boxes, packs that work in the heat of a camp or a vehicle |
| Li-ion NMC (18650, 21700) | Light and compact for its energy | Power banks, tools, handheld equipment |
| NiMH | Drop-in for older equipment | Instruments and devices designed for NiMH packs |
Battery University lists LiFePO₄ at 2,000 cycles and more with good thermal stability; NMC stores more energy per kilogram. We choose by where the pack lives and how it is used.
Portable power in Gulf heat
- Keep it out of the sun. A power station in a closed car in summer sits far above the air temperature; shade and ventilation matter more than any part.
- BMS temperature limits. Our BMS stops charging when the cells are too hot and stops discharging if they overheat.
- Store at part charge. For a station used only on winter trips, store it at about half charge in a cool room.
- Dust. Thick-walled sealed cases and covered sockets for desert use.
Portable power station price in the UAE: what drives the cost
- Capacity. Cost scales with watt-hours.
- Inverter power. A 2.5 kW pure sine inverter costs more than a 500 W one, and needs a stronger BMS and thicker cables.
- Outputs and charging. A solar controller, USB-C, a display and Bluetooth add parts and assembly.
- Case. A cast, thick-walled or waterproof case costs more than a basic box.
- Repack or new pack. A repack in the original case is usually simpler than a new pack designed from scratch.
Send us the brief and we return a costed proposal — request a quote.
Portable power stations across the UAE and the GCC
We build in Dubai and deliver to all seven Emirates and to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman (see our delivery policy). Lithium packs ship as Class 9 dangerous goods, usually by courier or road; air shipping has stricter limits on charge and size. Winter is the camping season across the region, from the UAE deserts to Saudi Arabia and Oman, so order well before your trip.
Safety, standards and paperwork
The cells we use have passed the UN 38.3 transport tests, and every pack is capacity-tested before it leaves. The finished pack is shipped as Class 9 dangerous goods under the rules that apply to its size and production run. For portable lithium cells and batteries the reference safety standard is IEC 62133-2, which covers safe operation under intended use and reasonably foreseeable misuse; for the larger stations we design to IEC 62619, as for our stationary batteries. If your product needs certificates for sale or an approval, tell us at the brief stage.
Related applications
Larger and fixed systems: UPS and inverter batteries, 12 V and 24 V batteries for CCTV and industrial equipment, caravan and RV power. Hobby packs: RC car and FPV drone LiPo batteries and drone and robot packs.
From our work
- Mobile power stations, 3.6 and 7.2 kWh: LiFePO₄ in cast ABS cases with 5 mm walls, Bluetooth and external displays. On AC, allowing for inverter losses and depth of discharge, the 3.6 kWh station runs 200 W for about 14 hours or 1 kW for about 3 hours; the 7.2 kWh station runs 0.5 kW for about 11–12 hours or 1.5 kW for about 4 hours. Another 7.2 kWh station went out with a modular 1.2 kW charger.
- Portable power station, third revision: 3.6 kWh, up to 2.5 kW on AC, USB and a 12 V socket, with modules added or removed to the customer's brief.
- 12V 210Ah battery boxes with AC outlets: sealed blocks with sockets, a charge indicator and 12 V terminals, built as an alternative to a popular off-the-shelf station with twice its capacity and nothing the owner did not need.
- 12V 105Ah battery box, "Pro" version: 100 A continuous, loads up to 1,200 W, a battery monitor, two USB-A, two USB-C and a car socket, 5 A active balancing — for an electric boat motor and as a high-capacity charging station for devices.
- 100 A modular charger: four 25 A power supplies on an aluminium frame, with charge current in steps of 25, 50, 75 and 100 A; if one supply fails, the others keep charging, and the long shape fits in a backpack.
- Repacks in original cases: new 36V 23Ah and 48V 17Ah packs with smart BMS built into two old e-bike cases. Inside one of the old ones we found tape instead of heat-shrink, sanded used cells, no internal insulation and the trace of a short circuit.
- Old parts tested before reuse: a customer brought used LiFePO₄ cells and a BMS. Three cells self-discharged and the set gave only 8 Ah of 105 at 40 A, so we built on new cells and kept only the BMS, which had passed its test — the finished battery measured 110.4 Ah.
What to send us for a quote
- The devices you want to power, their power in watts or their voltage and current, and for how long.
- The outputs you need — AC, USB-C, 12 V, a specific DC plug — and how you will charge: mains, solar, car.
- For a replacement or repack: photos of the old battery, its label and connector, and the device model.
- Size or weight limits, and the country and city for delivery.
Send it by WhatsApp or through the quote form — we reply on WhatsApp during working hours with questions or a costed proposal.
Frequently asked questions
Do you build custom portable power stations?
Yes. We build LiFePO₄ power stations from about 1.3 to 7.2 kWh with the outputs you choose — AC sockets, USB-C and USB-A, 12 V and DC outputs — and mains, solar or car charging, capacity-tested before delivery.
What size portable power station do I need for camping?
Add up the average watts of your devices and multiply by the hours. A fridge, lights, a fan and phone charging at about 150 W for 12 hours need 1.8 kWh, so a 12V 210Ah LiFePO₄ station of about 2.7 kWh gives a safe margin.
Can a portable power station charge from a solar panel?
Yes. We build the charge controller into the case and size the panel so it can refill the battery in a day, with a margin for dust and shade.
Do you make power banks?
We build custom power banks and device packs — high capacity, a specific DC voltage, USB-C built into a case or a product. We do not sell standard phone power banks.
Can I take a large power bank on an Emirates flight?
Only one power bank under 100 Wh, about 27,000 mAh at 3.7 V, in cabin baggage, and it may not be used or charged on board since 1 October 2025. Larger custom packs are for use on the ground.
Do you replace phone batteries?
No. We are a battery pack workshop, not a phone repair shop. We build and repack batteries for tools, instruments and equipment, and build portable power stations.
Can you replace the cells in my tool or equipment battery?
Often, yes. We check the pack's electronics first, then fit new matched cells in the original case and test the capacity. If a genuine replacement is available and better value, we tell you. We do not repack laptop batteries — many lock after a cell change, so a genuine replacement is the right choice.
How do I check my laptop battery health?
Compare its full-charge capacity with its design capacity and look at the cycle count; most laptops show both in their battery report. Replace it when the remaining capacity no longer covers your working day, or at once if the battery swells.
How much does a portable power station cost in the UAE?
It depends on the capacity, the inverter power, the outputs and the case. Send us your devices and how long they must run, and Thunderbolt returns a costed proposal.
Sources
- Dubai Media Office — Emirates makes changes to safety rules for customer usage of power banks onboard (8 August 2025) — from 1 October 2025: one power bank under 100 Wh, no use or charging on board, not in checked luggage
- Transport Canada — Evaluation and analysis of substandard lithium-ion batteries by UN 38.3 testing — 10 of 20 third-party replacement battery sets failed UN 38.3; failures in short-circuit and overcharge tests led to fire
- Battery University — BU-808: How to Prolong Lithium-based Batteries — estimated capacity after one year at 40 °C: 65% at 100% charge, 85% at 40% charge
- Battery University — BU-205: Types of Lithium-ion — LiFePO₄ cycle life of 2,000 and higher, thermal stability
- IEC 62133-2 — safety requirements for portable sealed secondary lithium cells and batteries
- Intertek — UN 38.3 testing — nearly all lithium batteries must pass section 38.3 of the UN Manual of Tests and Criteria for transport


